局部及全叶高合成射流对高速压气机静叶栅流场结构的影响

数值研究了合成射流控制高速压气机静叶栅吸力面角区分离,对比分析了不同射流结构对叶栅内流场结构及气动性能的影响。研究结果表明:合成射流通过周期性地吹气和吸气推迟角区分离、降低总压损失,由于吹气和吸气阶段的作用效果不同,使得叶栅出口损失系数的改善效果呈现出周期性波动。合成射流对通道涡以及角区二次流的有效控制是其取得良好控制效果的关键,当冲角为2°时,局部、全叶高方案最大可使总压损失系数分别降低22.2%和23.8%。由于局部叶高方案无法控制叶展中部的流动,造成该区域的尾迹损失增大,从而导致其流动控制效果弱于全叶高方案。两种射流结构都具有良好的变工况适应特性,全叶高方案在大冲角时逐渐体现出其优势,当冲角为4°时,总压损失系数的改善幅度相比局部叶高方案提高了2.8%。      

承载传动误差最小的高重合度弧齿锥齿轮波动齿面设计

为改善航空弧齿锥齿轮的承载啮合性能,结合ease-off技术提出一种波动齿面设计方法以降低高重合度弧齿锥齿轮的承载传动误差。鉴于中凹型修形曲线（修形齿面的几何传动误差曲线）可极大地减小高重合度弧齿锥齿轮传动的承载传动误差波动幅值,创建一种与高重合度相适应的波动齿面修形模型;结合ease-off技术建立以降低承载传动误差波动幅值为目标的优化模型;通过优化得到具有良好啮合性能的高重合度弧齿锥齿轮。分析发现:优化后2阶传动误差设计弧齿锥齿轮传动的承载传动误差波动幅值降低了34.152%,而由波动齿面设计方法所得改进修形弧齿锥齿轮的承载传动误差进一步降低了61.492%,有效地改善了高重合度弧齿锥齿轮传动性能,为高性能弧齿锥齿轮齿面设计奠定理论基础。      

Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

铰链对含铰结构非线性动力学特性影响分析

针对可展结构中铰链带来的展开后非线性动力学问题,建立了含铰结构的动力学模型。基于铰链侧向和径向的几何约束关系,分析了不同约束条件下的铰链非线性特性。基于谐波平衡法（HBM）,对含铰结构的非线性变量进行一次谐波展开,得到铰链非线性力的谐波展开表达式,将含铰可展结构的非线性动力学方程转化为代数方程。分析了铰链在不同非线性特性下各参数对结构动态特性的影响,得到结构固有频率随铰链间隙、刚度和激振力的变化规律。考虑铰链的非线性特性,通过固有频率脊线求解,得到结构固有频率极值随铰链数量、位置和刚度的变化曲面,并对其进行非线性拟合,得到铰链参数对结构固有频率的影响函数,其计算方法和结果在多维复杂结构中具有一定的扩展性,为可展结构的设计和研究提供参考。利用龙格库塔法对非线性结构进行数值仿真,得到结构的固有频率变化曲线,仿真结果表明了利用HBM进行含铰结构动力学分析的正确性。     

在役钢结构概率安全评定方法

针对大型在役钢结构的安全评定问题,综合利用第二水平法和Monte Carlo法,提出了静载和疲劳条件下概率安全评定的方法;并利用三阶段腐蚀规律对海洋气候腐蚀条件下概率安全评定过程进行了修正.以青岛港装船机主梁和翻车机端环为例进行了实际结构的安全评定分析计算,分别得出了这些结构中一些缺陷的确定性和概率安全评定结果.2种评定结果是大体上是相近的,但也存在一些不同.通过对这些确定性和概率安全评定结果的对比分析,得到了确定性和概率性安全评定方法的初步关系式-近似为单对数线性关系,此结论为概率安全评定方法的工程化奠定了基础.     

Low sensitivity m ification for spiral bevel gears

为了改善航空弧齿锥齿轮的啮合稳定性,提出了齿面低敏感性修形．基于齿面误差和误差敏感性矩阵,建立齿面误差修正模型,用广义逆矩阵的最小二乘法求解超越方程组,获得机床调整参数的修正量;对齿面进行3段抛物线修形,将修形后的齿面作为目标齿面,采用齿面误差修正的方法求得相应的机床调整参数;仿真算例表明：经过低敏感性修形,降低了齿面印痕的误差敏感性、提高了齿轮副的容差范围,但齿根弯曲强度下降了4．28％．因此,通过合理选择齿面修形系数,可降低齿根强度的变化,改善齿轮副啮合稳定性．     

弧齿锥齿轮误差敏感性优化设计

从齿面结构上提出了通过优化差曲面全曲率来改善弧齿锥齿轮的安装误差敏感性问题的方法.推导了啮合点处沿齿线方向的两啮合齿面全曲率作为敏感性系数,分析了局部综合参数和参考点位置参数对参考点处的敏感系数的影响.提出了通过优化传动比一阶导数、接触迹线方向、二阶变性系数和三阶变性系数,获得对安装误差敏感性低的小轮加工参数.算例表明:优化后的齿轮副在啮合过程中的敏感性系数控制在较小范围之内,传动误差的幅值和对称性均满足设计要求,改善了齿轮副的啮合质量.      

碳／碳复合材料薄壁结构在热声载荷作用下的动态响应

高速飞行器中大量使用复合材料薄壁结构,高温和强噪声联合作用的工作环境使复合材料薄壁结构表现出强非线性振动响应特性和复杂的运动形式。以四边固支碳／碳（C／C）复合材料薄壁结构为研究对象,采用有限元法计算了其在不同温度和声压级（SPL）组合下的振动响应。得到了典型的振动响应运动形式,包括屈曲前的随机振动、屈曲后的跳变运动和围绕一个平衡位置的随机振动。结合振动响应的概率密度、功率谱密度,随着温度和声压级的变化,对振动响应的非线性特性进行了分析。结果表明,热载荷和声载荷对响应非线性特性的影响方式不同,强噪声载荷引起的问歇跳变降低了结构的刚度。